Test automation of digital mammography device
Kangas, Kari-Matti (2008-05-12)
Kangas, Kari-Matti
Helsingin ammattikorkeakoulu Stadia Helsinki Polytechnic Stadia
12.05.2008
Julkaisu on tekijänoikeussäännösten alainen. Teosta voi lukea ja tulostaa
henkilökohtaista käyttöä varten. Käyttö kaupallisiin tarkoituksiin on kielletty.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:stadia-1210758962-1
https://urn.fi/URN:NBN:fi:stadia-1210758962-1
Tiivistelmä
Testing of a complex software is time consuming. Automated tools are available quite a lot for desktop applications, but for embedded systems a custom-made tool is required Building a complete test framework is a complicated task. Therefore, the test platform was built on top of an already existing tool, CANoe. CANoe is a tool for CAN bus analysis and node simulation. The functionality of CANoe was extended with LabVIEW DLL. The LabVIEW software was used for simulating hardware components of the embedded device As a result of the study, a platform was created where tests could be automated. Of the current test plan, 10 percent were automated and up to 60 percent could be automated with the current functionality.
Kokoelmat
- Tietotekniikka [51]