Haku
Viitteet 1-10 / 15
Determination of boiling heat transfer coefficients in plate heat exchangers
(Åbo Akademi, 2019)
I dagens samhälle växer behovet av kylutrustning ständigt. Kylutrustning kommer man i kontakt med i många olika applikationer så som; kylare i bilar, kylskåp och luftkonditioneringsapparater. Andra ständigt växande marknader ...
Study of percolation phenomena in ironmaking by DEM
(Åbo Akademi, 2019)
Increasing demand for steel has prompted the increase in production capacities for hot metal and need to improve the efficiency in the blast furnace operation. In the handling of the raw materials used in ironmaking, and ...
Flame retardancy of polymeric coatings
(Åbo Akademi, 2019)
Characterization of Industrial Filter Materials for Improved Filter Medium Selection
(Åbo Akademi, 2019)
Filter fabrics for solid/liquid separation have been analyzed and characterized in order to provide additional knowledge about said fabrics. Three different fabrics, AINO, MITO and ASKO have been studied in this thesis as ...
Evaluation of Optimal Chemical Aids and Process Parameters in Oil Refinery Wastewater Flocculation and Flotation
(Åbo Akademi, 2019)
Wastewater treatment of oil refinery effluents is a pre-requisite for refinery operations in a continuously stricter environmental regulatory framework. One effective method of treating typical refinery wastewaters with ...
Hydrodeoxygenation of lignin-derived phenol compound isoeugenol over nickel- and cobalt based catalysts
(Åbo Akademi, 2019)
The climate change has increased the need of renewable transportation fuels obtained from lignocellulosic biomass. Due to its high oxygen content and complex structure, catalytic hydrodeoxygenation (HDO) is needed to upgrade ...
Non-process elements in the recovery cycle of six Finnish Kraft pulp mills
(Åbo Akademi, 2019)
Some treatment techniques for humid exhaust air
(Åbo Akademi, 2019)
Online measurement techniques for nanocellulose films and coatings
(Åbo Akademi, 2019)
There has been an inclination in industrial coatings towards the utilization of more eco-friendly, renewable, and biodegradable solutions. Among these solutions, a material of special interest is nanocellulose, which, owing ...