Putkistosuunnittelun tunnusluvut
Heiskanen, Ilkka (2007-04-23T10:29:35Z)
Heiskanen, Ilkka
23.04.2007
Julkaisu on tekijänoikeussäännösten alainen. Teosta voi lukea ja tulostaa
henkilökohtaista käyttöä varten. Käyttö kaupallisiin tarkoituksiin on kielletty.
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:stadia-1176715576-2
https://urn.fi/URN:NBN:fi:stadia-1176715576-2
Tiivistelmä
Tässä insinöörityössä tutkittiin Neste Jacobsin toimeksiantamia laitossuunnitteluprojekteja ja tarkemmin niiden yleis- ja putkistosuunnittelua ja siinä yleisimmin käytettäviä tunnuslu-kuja. Tunnuslukujen selvittämistä varten valittiin neljä projektia, jotka olivat tyypillisiä teollisia investointiprojekteja, ja joista saadut tekniset tiedot olivat tuoreita. Valittujen projektien suunnittelutyö oli joko valmis tai valmistumassa tietojenkeruuhetkellä. Työssä tutkittiin projektien tunnuslukujen eroja ja niiden syitä. Projektien tekniset tiedot kerättiin niiden suunnittelutyössä mukana olleilta yrityksiltä. Alkutietojen hyväksymisen jälkeen niiden pohjalta laskettiin projektikohtaiset tunnusluvut Tunnuslukutietojen keräämisen tuli olla huolellista ja pitkäjänteistä, koska niistä saatuja tietoja käytetään tulevien projektien laajuuksien ja kustannuksien arviointiin. Työn tärkeimpiä tuloksia olivat yleisimmin käytettyjen tunnuslukujen saanti jokaisesta pro-jektista ja tietojen kokoaminen helposti luettavaan taulukkoon. Saatuja tuloksia voidaan pitää luotettavina ja niitä voidaan käyttää jatkossa arvioitaessa projektien laajuuksia. The purpose of this thesis was to analyse the most commonly used key figures of piping design in plant design projects. Every analysed project was an assignment of Neste Ja-cobs Ltd. The selected projects for analysing were four typical industrial investment projects. They had the newest technical information available. Design phase for the projects was either finished or almost finished. The intension of the thesis was to find deviations and their causes between different projects. The technical information was collected from the com-panies involved in the designing of the projects. The quality of the information had to be approved before calculating the key figures for every project. When collecting the technical information of projects one must be thorough and accurate in order to avoid false information. The calculated key figures are used in the future pro-jects for estimating the cost and comprehensiveness of the project. The most significant result of the thesis was to achieve the conclusions of the commonly used key figures for every analysed project and collecting them in to a one easily compre-hensive table. The final results can be considered reliable and they can be used in the future for estimat-ing the comprehensiveness of the project.